HS code: 8471.90.90.00-6 (reference)
The e-Writer32 is a programmer dedicated designed for the HT32 series Flash MCUs. You can use a HT32 adaptor or your target board to program the MCU. Connect the programmer to your computer via a USB cable and open the software, HOPE3200, for programming.
Please be informed that some MCUs have a larger Flash ROM (indicated as following) must be programmed by using the e-Writer32 V1.1.
| Part number | Supported adaptor | Programmer |
|---|---|---|
| HT32F61244 | ESKT32ICPB
ESKT3248LQFP_61244/5 ESKT3264LQFP_61244/5 |
e-Writer32 V1.1 |
| HT32F61245 | ESKT32ICPB
ESKT3248LQFP_61244/5 ESKT3264LQFP_61244/5 |
e-Writer32 V1.1 |
| HT32F61355 | ESKT3248LQFP_61355/6
ESKT3264LQFP_61355/6 |
e-Writer32 V1.1 |
| HT32F61356 | ESKT3248LQFP_61355/6
ESKT3264LQFP_61355/6 |
e-Writer32 V1.1 |
| HT32F61357 | ESKT3248LQFP_61357
ESKT3264LQFP_61357 |
e-Writer32 V1.1 |
| HT68FV022 | ESKT328SOP_68XV02X | e-Writer32 V1.1 |
| HT68FV024 | ESKT328SOP_68XV02X | e-Writer32 V1.1 |
You can identify the e-Writer32 V1.1 and e-Writer32 based on the label on the back of the product.
Product information
Dimension: 202 x 201 x 38 mm
Net Weight: 357g
Product includes:
1. Programmer e-Writer32 x 1
2. USB cable x 1
3. 5V USB power adapter x 1
4. Ground wire (1.5M) x 1
5. Screw x 1
| HS Code (reference) | 8471.90.90.00-6 |
|---|
