MPU-6050 Gyroscope and Accelerometer Module BMS56M605
US$8.00
In stock
Quantity
180
pieces
Product ID
BMS56M605
The BMS56M605 is a gyroscope and accelerometer module developed by using an on-board gyroscope and accelerometer sensor, the MPU-6050, and read datas via I2C interface.
The MPU-6050 integrates two sensors, classic 3-axis accelerometer and gyroscope.
The accelerometer is used to determine down towards direction by measuring gravity, while the gyroscope can sense how fast the module is being twisted around.
The BMS56M605 provides three trigger conditions, free fall interrupt, zero motion interrupt and motion interrupt. You can select one of the trigger conditions based on your application and configure the trigger threshold and trigger duration of it.
The product breaks out the MPU-6050’s pins to match BMCOM connectors. With the BMCOM, you can directly connect the product to BMduino development boards, such as BM53A367A directly. You can use it with other development boards, such as Arduino UNO, as well.
PRODUCT FEATURES
Input voltage: 3.3V~5.5V
Standby current: 5μA
Sensor: MPU6050 (integrated gyroscope and accelerometer)
Gyroscope:
- Operating current: 3.6mA
- Integrated 16-bit ADC, output X/Y/Z axis angular velocities
- Full-scale range of ±250, ±500, ±1000 and ±2000°/sec (configurable)
Accelerometer:
- Operating current: 500μA
- Integrated 16-bit ADC, output X/Y/Z axis accelerations
- Full-scale range of ±2g, ±4g, ±8g and ±16g (configurable)
Trigger condition: free fall interrupt, zero motion interrupt and motion interrupt (configurable)
Interface: I2C (default 0x68)
- The address can be modified via on-board solder jumper
Dimension: 36 x 23.3 x 7.4 mm
Net weight: 3.3g
HARDWARE OVERVIEW
PIN DESCRIPTION
Pin
Pin name
Function
1
GND
Ground
2
VDD
Power supply: 3.3V~5.5V
3
SDA
I2C data line
4
SCL
I2C clock line
5
INT
Interrupt pin
needs to configure the triggered power level
(high or low)
