Best Modules will be closed from Apr. 3nd to Apr. 6th in observance of Tomb Sweeping Day.
Please be informed that any orders placed after 15:00 PM Apr. 1st (Taiwan time, UTC+8) will be processed on Apr. 7th.

Shopping Cart 0
US$0.00

4-Key Capacitive Touch Module (BMCOM) BMK52M134

US$2.80
In stock
Quantity
154 pieces
Product ID
BMK52M134

The BMK52M134 is a capacitive touch module with four keys arranged in a 2x2 array. Up to four BMK52M134 modules can be cascaded, and you can read or control the keys through the I2C interface.

Quantity Discounts refresh image
Select Quantity Discount Unit price
1-9 - US$2.80
10+ 5% US$2.66
For more quantity discounts please contact us
Follow Us for More Updates!
DESCRIPTION

When a finger touches the copper trace area on the PCB representing the switch area, the capacitance of this area will change. The BMK52M134 determines the output status of the INT pin by detecting this change.

You can cascade up to four BMK52M134 modules simultaneously, and when cascading, you only need to connect one of them to the development board.

The development board reads the keys’ statuses via I2C interface and lights up the corresponding LED. Sensitivity of the touch keys can be individually configured based on your application. For instance, when you place an acrylic panel on the BMK52M134, the capacitance of the affected copper foil area decreases. Consequently, the keys may require higher sensitivity.

There is a BMCOM on the product to directly connect to BMduino development boards, such as BM53A367A. You can use the product with other development boards, such as Arduino UNO, as well.

PRODUCT FEATURES
  1. Operating voltage: 2.5V~5.5V
  2. Operating current:
    - 1.41mA @3.3V (non-touched)
    - 5.91mA @3.3V (all keys are touched and all LEDs light up)
  3. Standby current: 0.02mA @3.3V
    - Automatically enters standby mode if no touch is sensed within 8 seconds
    - When the module is in standby mode, it can only be awakened by a touch
  4. Can cascade up to four BMK52M134 modules simultaneously
  5. Sensitivity of keys can be configured individually
    - 55 levels (10 to 64, default 16)
    - The smaller the value, the higher the sensitivity
  6. Interface: I2C (address: 0x71)
  7. Dimension: 33.8 x 38.56 x 6.5 mm
  8. Net weight: 6g
  9. Product includes: BMK52M134 x1, 2x2P header x1
HARDWARE OVERVIEW
PIN DESCRIPTION

Rear of the BMK52M134

Pin Pin name Function
1 INT Sensed a touch: output low level
Non-sensed: output high level
2 SCL I2C: clock line
3 SDA I2C: data line
4 VDD Power supply: 2.5V~5.5V
5 GND Ground
6 GND Ground
7 VDD Positive power
8 ST_O Cascade status output
9 TRX Cascade single-bus communication pin
10 VDD Positive power
11 GND Ground
12 ST_I Cascade status input
13 TRX Cascade single-bus communication pin
PRODUCT FAQs

Question 1: Can touch keys senses even if I put glass or acrylic on it?

Answer: Sure, you can put glass or acrylic with the maximum thickness of 3mm on the board, and it is recommended to configure sensitivity of touch keys to achieve the best touch feedback.

RESOURCES
  1. MCU : Holtek BS86C08C, Enhanced Touch A/D Flash MCU with LED Driver, including datasheet, package information, etc.
More Information
HS Code (reference) 8504.50.90.00-5
Contact Us