Want to start developing products with Holtek MCU? Holtek sells hundreds of millions of MCUs every year and is widely used in various products, making it the best choice for your product.
The Holtek Easy DEV development board series makes it easy to start using the Holtek MCU. It is used with e-Link for code debugging and MCU programming. The following is a brief description of how to use.
Power supply: 5V voltage can be supplied from the USB interface, through a voltage regulator 3.3V is generated. You may select 5V or 3.3V as the DEV board power supply with a jumper. You may use e-Link as an alternative power source, which allows you to set any voltage value in the HT-IDE3000 software. The power indicator LED will light up when power is applied.
Development environment: Connect the 5-pin header of the DEV board to e-Link and use the Holtek HT-IDE3000 for program development and debugging.
Demo code: The DEV board has pre-programmed the demo code at factory. The code uses an I/O pin to demonstrate the LED breathing light function. If you want to use this I/O pin, remove the blue jumper cap.
MCU programming: Connect the 5-pin header of the DEV board to e-Link and use the HOPE3000 for e-Link software for programming. The other way is using the e-WriterPro. At this point, the DEV board must be placed on the adapter ESKT40DIPC for programming.
